1/4 BSP Oil Tap with Cutout Switch for Magneto
A combined oil tap and switch which can be connected to the bikes magneto. This ensures that, if the oil tap is 'off', the switch will stop any sparks and the engine cannot be started until the oil is switched on.
We are able to offer these taps in either Female/Female or Female/Male. Please choose the type you require from the drop down menus. You may then need to sort out some other fittings to connect the tap to your pipes. We sell a range of these which can be found here. If you have any questions about fitting one of these taps please Contact Us and we'll do our best to help.
All of our oil taps come with fitting instructions which can be seen here if you would like to take a look before you buy.
If your magneto does not currently have a cutout facility, we have a range of new points caps available which provide this facility.